72 Chapter 72: Iron and steel.

Containing by weight more than 55 % of silicon

720221

720229

Containing by weight more than 4 % of carbon

720241

720249

Ferro-titanium and ferro-silico-titanium

720291

Ferro-silico-manganese

720250

Ferro-silico-chromium

Ferro-tungsten and ferro-silico-tungsten

7203

Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms.

Showing 4 & 6 Digit Codes

720310

Ferrous products obtained by direct reduction of iron ore

720390

Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

7204

Ferrous waste and scrap; remelting scrap ingots of iron or steel.

Showing 4 & 6 Digit Codes

720449

Waste and scrap of cast iron

720410

720430

Waste and scrap of tinned iron or steel

720450

Remelting scrap ingots

7205

Granules and powders, of pig iron, spiegeleisen, iron or steel.

Showing 4 & 6 Digit Codes

7206

Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03).

Showing 4 & 6 Digit Codes

7207

Semi-finished products of iron or non-alloy steel.

Showing 4 & 6 Digit Codes

720711

Of rectangular (including square) cross-section, the width measuring less than twice the thickness

720712

Other, of rectangular (other than square) cross-section

720719

Containing by weight 0.25 % or more of carbon

720720

7208

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.

Showing 4 & 6 Digit Codes

720825

Of a thickness of 4.75 mm or more

720826

Of a thickness of 3 mm or more but less than 4.75 mm

720827

720836

Of a thickness of 4.75 mm or more but not exceeding 10 mm

720837

720838

Of a thickness of 3 mm or more but less than 4.75 mm

720839

720851

Of a thickness of 4.75 mm or more but not exceeding 10 mm

720852

720853

Of a thickness of 3 mm or more but less than 4.75 mm

720854

In coils, not further worked than hot-rolled, with patterns in relief

720810

720840

Not in coils, not further worked than hot-rolled, with patterns in relief

720890

Of a thickness of 3 mm or more

7209

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated.

Showing 4 & 6 Digit Codes

720915

720916

Of a thickness exceeding 1 mm but less than 3 mm

720917

Of a thickness of 0.5 mm or more but not exceeding 1 mm

720918

Of a thickness of 3 mm or more

720925

720926

Of a thickness exceeding 1 mm but less than 3 mm

720927

Of a thickness of 0.5 mm or more but not exceeding 1 mm

720928

720990

Of a thickness of 0.5 mm or more

7210

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.

Showing 4 & 6 Digit Codes

721011

721012

Plated or coated with aluminium-zinc alloys

721069

Plated or coated with lead, including terne-plate

721020

721030

Electrolytically plated or coated with zinc

721050

Plated or coated with chromium oxides or with chromium and chromium oxides

721070

Painted, varnished or coated with plastics

721090

Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief

7211

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.

Showing 4 & 6 Digit Codes

721113

721114

Other, of a thickness of 4.75 mm or more

721119

Containing by weight less than 0.25 % of carbon

721123

7212

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.

Showing 4 & 6 Digit Codes

721210

Plated or coated with tin

721220

Electrolytically plated or coated with zinc

721230

Otherwise plated or coated with zinc

721240

Painted, varnished or coated with plastics

721250

Otherwise plated or coated

721260

Clad

7213

Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.

Showing 4 & 6 Digit Codes

721391

Of circular cross-section measuring less than 14 mm in diameter

721399

Containing indentations, ribs, grooves or other deformations produced during the rolling process

721310

721320

Other, of free-cutting steel

7214

Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling.

Showing 4 & 6 Digit Codes

721491

Of rectangular (other than square) cross-section

Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling

721430

Other, of free-cutting steel

7215

Other bars and rods of iron or non-alloy steel.

Showing 4 & 6 Digit Codes

721510

Of free-cutting steel, not further worked than cold-formed or coldfinished

721550

Other, not further worked than cold-formed or cold-finished

721590

Obtained from flat-rolled products

7216

Angles, shapes and sections of iron or non-alloy steel.

Showing 4 & 6 Digit Codes

721669

Cold-formed or cold-finished from flat-rolled products

721691

721699

U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm

721610

721640

L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more

721650

Other angles, shapes and sections, not further worked than hotrolled, hot-drawn or extruded

7217

Wire of iron or non-alloy steel.

Showing 4 & 6 Digit Codes

721710

Not plated or coated, whether or not polished

721720

Plated or coated with zinc

721730

Plated or coated with other base metals

721790

Of rectangular (other than square) cross-section

7218

Stainless steel in ingots or other primary forms; semi-finished products of stainless steel.

Showing 4 & 6 Digit Codes

721891

721899

Ingots and other primary forms

721810

7219

Flat-rolled products of stainless steel, of a width of 600 mm or more.

Showing 4 & 6 Digit Codes

721911

Of a thickness of 4.75 mm or more but not exceeding 10 mm

721912

721913

Of a thickness of 3 mm or more but less than 4.75 mm

721914

721921

Of a thickness of 4.75 mm or more but not exceeding 10 mm

721922

721923

Of a thickness of 3 mm or more but less than 4.75 mm

721924

Of a thickness of 4.75 mm or more

721931

721932

Of a thickness of 3 mm or more but less than 4.75 mm

721933

Of a thickness exceeding 1 mm but less than 3 mm

721934

Of a thickness of 0.5 mm or more but not exceeding 1 mm

721935

721990

Of a thickness of 4.75 mm or more

7220

Flat-rolled products of stainless steel, of a width of less than 600 mm.

Showing 4 & 6 Digit Codes

722011

722012

Of a thickness of less than 4.75 mm

722020

Not further worked than cold-rolled (cold-reduced)

722090

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.

7221

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.

Showing 4 & 6 Digit Codes

722100

7222

Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.

Showing 4 & 6 Digit Codes

722211

Of circular cross-section

722219

Bars and rods, not further worked than cold-formed or cold-finished

722220

722230

Other bars and rods

722240

Angles, shapes and sections

7223

Wire of stainless steel.

Showing 4 & 6 Digit Codes

722300

Wire of stainless steel.

7224

Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.

Showing 4 & 6 Digit Codes

722410

Ingots and other primary forms

722490

Electrolytically plated or coated with zinc

7225

Flat-rolled products of other alloy steel, of a width of 600 mm or more.

Showing 4 & 6 Digit Codes

722592

Otherwise plated or coated with zinc

722599

Other, not further worked than hot-rolled, in coils

722530

722540

Other, not further worked than hot-rolled, not in coils

722550

Other, not further worked than cold-rolled (cold-reduced)

7226

Flat-rolled products of other alloy steel, of a width of less than 600 mm.

Showing 4 & 6 Digit Codes

Not further worked than hot-rolled

722692

Not further worked than cold-rolled (cold-reduced)

7227

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.

Showing 4 & 6 Digit Codes

722710

Of high speed steel

722720

Of silico-manganese steel

722790

Bars and rods, of high speed steel

7228

Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.

Showing 4 & 6 Digit Codes

722810

722820

Bars and rods, of silico-manganese steel

722830

Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded

722840

Other bars and rods, not further worked than forged

722850

Other bars and rods, not further worked than cold-formed or coldfinished

722860

Other bars and rods

722870

Angles, shapes and sections

722880

Hollow drill bars and rods

7229

Wire of other alloy steel.

Showing 4 & 6 Digit Codes

722920

Of silico-manganese steel

722990